ValidatedDemonstration
Mechanical Mounting Bracket
A single verified engineering result set produced by A.I.U.D.E.'s solver pipeline during development. All values below are from the actual solver run; anything not disclosed is marked explicitly. These results are shown for demonstration and status tracking — professional engineering review is required before any real-world fabrication or safety-critical use.
Solver
CalculiX
Solver exit code
0 · PASS
Available exports
STEP · STL
Stress vs. Yield
Yield-to-Stress Ratioσ_max = 34.31 MPa
σ_yield = 276 MPa
Max stress
34.3120
MPa
Yield strength
276
MPa (referenced)
Ratio σ_yield / σ_max
8.04×
referenced yield strength ÷ calculated maximum stress — not a certified safety factor
Displacement
0.4147
mm (maximum)
Solver Completion
exit_code = 0
CalculiX terminated normally.
Not Disclosed in This Demonstration
load valueNot disclosed in this demonstration
dimensionsNot disclosed in this demonstration
material identityNot disclosed in this demonstration
mesh sizeNot disclosed in this demonstration
boundary conditionsNot disclosed in this demonstration
Engineering review required. Professional engineering review remains required before real-world fabrication or safety-critical use.